Wall‑Mount Ladder Shelf with Three Tiers

Description

This product is a wall‑mounted ladder‑style shelving unit featuring three progressively deeper shelves connected by two inclined side rails. It is constructed from kiln‑dried pine wood with a semi‑transparent stain in a warm walnut tone, protected by a clear satin polyurethane topcoat. The overall unit measures 45 cm in width, with a total height of 80 cm and a total depth ranging from 15 cm at the top tier to 28 cm at the bottom tier (measured from the wall to the front edge). The three shelves are fixed horizontally and spaced vertically at 25 cm intervals; individual shelf dimensions are: top shelf 45 cm × 12 cm, middle shelf 45 cm × 18 cm, bottom shelf 45 cm × 25 cm. Each shelf has a 1.5 cm thick solid pine board with no lip or guard rail, meaning items placed on them must have stable bases. The side rails are inclined at 12 degrees from vertical and are 3.5 cm thick; they are secured to the wall through two steel mounting plates (one at the top, one at the bottom) that are pre‑attached to the rails. Each mounting plate has three screw holes, requiring a total of six screws into the wall. Wall anchors and screws for concrete and brick are supplied; for stud mounting, wood screws are provided but stud detection is the installer’s responsibility. The unit is shipped fully assembled. The stain has been absorbed into the pine grain but does not obscure the natural knot pattern – visible knots and colour variations are present and should be expected. The polyurethane topcoat provides good resistance to occasional water spills and abrasion, but it is not chemical‑resistant; solvent spills may soften the finish. The recommended load capacity per shelf is 3 kg for the top, 4 kg for the middle, and 5 kg for the bottom, assuming uniform distribution and proper wall fixation. The total unit weight is 3.6 kg. This ladder shelf is suitable for displaying framed photos, small potted plants, paperback books, or rolled towels in a bathroom only if the bathroom has adequate ventilation and no direct shower spray; otherwise, the pine wood may warp or develop mould over extended exposure to humidity above 70% RH. Installation requires a drill with an 8 mm bit, a level, and a cross‑head screwdriver. Due to the inclined design, the top shelf sits closer to the wall than the bottom shelf; users should verify that taller items placed on lower shelves do not hit the upper shelf when inserted.