Compact Vanity Shelf with Fixed Angled Mirror

Description

This wall‑mounted vanity unit integrates a small display shelf with a fixed mirror angled slightly downward to facilitate facial viewing from a standing position. The frame and shelf are constructed from MDF with a moisture‑resistant white acrylic paint finish on all exposed surfaces, applied in two coats with a satin sheen. The overall unit measures 30 cm in width, 28 cm in height, and 14 cm in total projection from the wall. The shelf portion at the bottom is 30 cm wide, 12 cm deep, and has a 1.5 cm high raised lip on the front and side edges, creating a shallow tray to hold items such as a toothbrush cup, a small face cream jar, or a bar of soap. The mirror is mounted within the upper frame section, measuring 22 cm in width and 18 cm in height, with a fixed tilt of 10 degrees from vertical, angled forward so the reflective surface faces slightly downward toward the shelf. The mirror glass is 4 mm thick with a silver backing and a beveled edge (3 mm bevel) for a decorative appearance; it is not a magnifying mirror and provides 1:1 reflection. The acrylic paint finish is resistant to humidity from bathroom use but is not waterproof; standing water left on the shelf surface will penetrate through microscopic pinholes in the paint film over time, causing the MDF core to swell. The shelf is intended for dry‑hand use only – wet towels or dripping bottles should not be placed directly on it. The unit mounts to the wall via two keyhole slots on the back panel, spaced 22 cm apart, using two screws with wall plugs (supplied for masonry; for tile walls, appropriate tile anchors are recommended but not included). The recommended load on the shelf is 1.5 kg total, evenly placed, which is sufficient for two to three small toiletry containers. The mirror and frame are pre‑assembled as a single piece; no assembly is required. The total weight is 1.3 kg. The acrylic paint has a gloss retention rating that is suitable for indoor use but may yellow slightly if exposed to UV light from windows over several years; this is a known characteristic of some acrylic resins. The shelf is not designed for holding hairdryers, large bottles over 300 ml, or any hot styling tools. It should be installed in a powder room or a bathroom area away from direct shower spray, ideally with a ventilation fan to keep relative humidity below 65% during and after use. Cleaning the mirror requires a standard glass cleaner; abrasive pads will scratch both the mirror and the painted frame. All necessary screws are included, but a drill with a 6 mm bit and a Phillips screwdriver are required for installation and are not supplied.